Winradio wr-g39wsbi sonobuoy telemetry receiver pci
Click the image to enlarge

WiNRADiO Communications

Winradio wr-g39wsbi sonobuoy telemetry receiver pci

£0.00
(£0.00 exc. VAT)
£8,034.00
(£6,695.00 exc. VAT)
In Stock
Qty:


0 Reward points
Product code: G39WSBi
Download a pdf document for Winradio wr-g39wsbi sonobuoy telemetry receiver pci

Want to be notified when this product is back in stock? Complete the form below and we'll send you an email when it is.

Finance Available

Radioworld now offer finance through our partners Close Brothers.

Add the item to your basket in the normal way and at checkout choose to make payment via Finance. You’ll then be taken through to our partners Pay4Later to make your finance application.

Item CostFinance OptionDepositMonthly PaymentsTotal Cost
£8,034.00
12 Months 14.9% APR
£803.40
£692.33
£9,111.36
£8,034.00
18 Months 14.9% APR
£803.40
£461.55
£9,111.36
£8,034.00
24 Months 14.9% APR
£803.40
£346.16
£9,111.36
£8,034.00
36 Months 14.9% APR
£803.40
£230.78
£9,111.36
£8,034.00
48 Months 14.9% APR
£803.40
£173.08
£9,111.36
£8,034.00
12 Months 19.5% APR
£803.40
£720.05
£9,443.97
£8,034.00
18 Months 19.5% APR
£803.40
£480.03
£9,443.97
£8,034.00
24 Months 19.5% APR
£803.40
£360.02
£9,443.97
£8,034.00
36 Months 19.5% APR
£803.40
£240.02
£9,443.97
£8,034.00
48 Months 19.5% APR
£803.40
£180.01
£9,443.97

Click here to recommend this product to a friend

Recommend a friend

Winradio wr-g39wsbi sonobuoy telemetry receiver pci

Winradio wr-g39wsbi sonobuoy telemetry receiver pci


The WiNRADiO WR-G39WSBi Sonobuoy Receiver is a third-generation receiver specifically designed for sonobuoy telemetry operation.

It is particularly suitable for standard DIFAR sonobuoys operating in the 136 to 173.5 MHz standard sonobouoy VHF band. This standard frequency range can be extended to UHF frequencies (up to 1.8 GHz) to suit customized telemetry requirements.

The WR-G39WSBi features an antenna input, analog output, as well as digitized audio output via the PCI bus for spectrum analysis and monitoring.

The fully self-contained receiver resides on a standard PCI-bus card designed to be installed in a standard or industrial-grade PC. The receiver is supplied together with Windows control software (Linux support is optional) and support documentation.

The receiver's modular architecture allows for a high-degree of customization for application-specific requirements. The receiver also contains its own DSP, making it possible to develop customized solutions featuring various on-board signal processing, analysis and decoding facilities.As most of the RF signal processing is performed by the card, the PC hardware and software requirements are modest. Up to eight cards can be plugged into the same computer, and controlled separately and independently. WiNRADiO can also supply complete rack-mounted multi-channel systems.The WR-G39WSBi receiver is supplied with Windows based application software. Programmers' API and Linux drivers are available upon request, suitable for integration in custom designed sonobuoy systems.

The Windows application software shows a graphical representation of all installed receivers (a virtual control panel), making it possible to observe the status of all receivers at a glance and make individual adjustments if necessary. Each receiver can be monitored and the real-time spectrum of the demodulated signal observed. An mixing facility is provided where a particular receiver can be selected for audio monitoring by simply clicking on the corresponding receiver panel.

Frequency range136.000-173.500 MHz

Channel spacing375 kHz

ModesFM (DIFAR)

Sensitivity0.9 µV

IF bandwidth230 kHz @ -6 dB

Skirt selectivity470 kHz @ -25 dB

730 kHz @ -60 dB

Frequency response5 Hz to 25 kHz @ ± 1 dB

5 Hz to 40 kHz @ ± 2 dB

Output level1.0 ± 0.2 V rms @ 75 kHz deviation and 1 kHz modulation frequency

RSSI range80 dB typ.

Image rejection70 dB or better

Tuning accuracy±1 ppm

Frequency stability±0.5 ppm

Input impedance50 ohm

Output impedance600 ohm

ConnectorsSMA for RF input and demodulator output; 3.5 mm audio jack for monitor output

InterfacePCI 2.2 compliant

Total power consumption6 W

DimensionsLength: 195 mm (7.68")

(excluding mounting bracket)

Height: 99 mm (3.90")

(excluding edge connector)

Thickness: 19 mm (0.75")

(incl. components on either side)

Weight330 g (11.6 oz)

Ambient temperatureStorage: -20º to +75º C

Operation: 0º to +45º C

All orders placed on this website will not be subject to VAT for customers residing in the European Union or the rest of the world. However, it is important to mention that VAT will still be applicable based on the rates set by your country upon delivery.

Our Price Match Promise means that if you find any of our Equipment at a lower advertised price elsewhere, we will match the price for you, subject to the below.

  • The product is identical to ours in brand, colour, size and model number.
  • The price must be the advertised price clearly on the competitor's online site.
  • The item must be in stock and available for immediate purchase (rather than available to order), with the authorised stockist able to complete delivery within 2-3 days.

Please fill out the form below. The details will be used to help us with your price promise request.

Your Details

Competitor Product

Weblink showing other retailers product at a reduced price, in stock and ready for dispatch

Product Details